| Application |
Fluid Specifications |
| Automatic Transmission |
Dexron-IIE ATF Or Equivalent |
| Brake Fluid |
DOT 4 Brake Fluid |
| Coolant (1) |
50/50 Mix Water & (ZVW-237-102)
Phoshate-Free Ethylene Glycol |
| |
|
| Engine Oil (Diesel) |
|
| Greater Than 50øF (10øC) |
SAE 20W-50 API SG/CD |
| 14ø-50øF (-10ø To +10øC) |
SAE 15W-40 API SG/CD |
| Less Than 14ø F (-10øC) |
SAE 10W-30 API SG/CD |
| |
|
| Engine Oil (Gasoline) |
|
| Greater Than 50øF (10øC) |
SAE 20W-50 API SG/CD |
| 14ø-50øF (-10ø To +10øC) |
SAE 10W-40 API SG/CD |
| Less Than 14ø F (-10øC) |
SAE 5W-30 API SG/CD |
| |
|
| Power Steering Fluid |
Dexron-IIE ATF Or Equivalent |
| Manual Transaxle |
Hypoid Gear Oil SAE 80W-90 API GL-5
Or SAE 75W-90 (G50 Synthetic) |
| Final Drive (Front Differential AWD) |
Hypoid Gear Oil SAE 80W-90 API/GL-5
Or SAE 75W-90 (G50 Synthetic) |
| Final Drive (A/T) (Differential) |
SAE 75W-90 (G50 Synthetic Gear Oil) |
| Wheel Bearings |
NLGI Grade 2 Category GC-LB |
| Steering Linkage (3)(4) |
NLGI Grade 2 Category GC-LB |
| Ball Joints (3)(5) |
NLGI Grade 2 Category GC-LB |
| Weatherstrip |
Dielectric Silicone Grease |
| |
| (1) - Only a phosphate-free product
should be used to replace factory coolant, damage to water jacket
sealing surfaces and cause cooling system corrosion |
| (2) - Use low pressure grease gun to
prevent seal damage |
| (3) - Fill until lubricant squeezes
out from the base of seals |
| (4) - Fill ball joint until seal starts
to swell |