*For reference only. Your vehicle may be different.
Description & Operation
Instrument cluster for most models includes speedometer, fuel gauge and temperature gauge. Optional instruments include clock, tachometer.
Printed circuit provides voltage to gauges. A voltage regulator attached to printed circuit controls voltage to fuel and temperature gauges.
Instrument Cluster Removal & Installation
Disconnect battery ground cable. Reach behind cluster hood and pull back of hood upward. Pull hazard switch forward. Pull brake warning light housing toward front of vehicle. Remove 4 mounting screws and remove cluster. To install, reverse removal procedure.
Instrument Cluster Connectors
Voltage Regulator Test
- If only one gauge is inoperative, regulator is not defective. If both fuel and temperature gauges are inoperative, voltage regulator may be faulty or have a bad ground connection.
- Partially remove instrument cluster. Position cluster so regulator can be reached with voltmeter probes. Leave chassis harness connected. Ensure ground connection at regulator is tight.
- Turn ignition on. Connect voltmeter negative(-) lead to terminal No. 2 of regulator. Connect positive () lead to terminal No 1. See Figure(s) below. Meter reading should be 9.5-10.5 volts. If reading exceeds specification, replace voltage regulator.
