*For reference only.
Mount dial indicator with tip at 90 degrees to face of flywheel. Move
flywheel in and out to check end play. If end play is incorrect, remove
flywheel, "O" ring, oil seal, and adjustment shims. Determine shim(s)
required to correct crankshaft end play.
END PLAY SPECIFICATIONS
|
Application
|
Specification
|
|
Standard
|
.003-.005 (.07-.13)
|
| Service Limit |
.006 (.15)
|
TORQUE SPECIFICATIONS
| Application |
Ft. Lbs. (N.m)
|
| Flywheel Or Drive Plate-To-Crankshaft |
80 (110)
|